awb7127 2.11 ghz through 2.17 ghz small-cell power amplifer module data sheet - rev 2.1 m41 package 14 pin 7 mm x 7 mm x 1.3 mm surface mount module figure 1: block diagram product description the awb7127 is a highly linear, fully matched, power amplifer module designed for picocell, femtocell, and customer premises equipment (cpe) applications. its high power effciency and low adjacent channel power levels meet the extremely demanding needs of small cell infrastructure architectures. designed for wcdma, hsdpa and lte air interfaces operating in the 2.11 ghz to 2.17 ghz band, the awb7127 delivers up to +24.5 dbm of wcdma (64 dpch) features ? ingap hbt technology ? -50 dbc acpr @ + 5 mhz, +24.5 dbm ? 30 db gain ? high effciency ? low transistor junction temperature ? internally matched for a 50 ? system ? low profle miniature surface mount package; halogen free and rohs compliant ? multi-carrier capability applications ? wcdma, hsdpa and lte air interfaces ? picocell, femtocell, home nodes ? customer premises equipment (cpe) ? data cards and terminals power with an acpr of -50 dbc. it operates from a convenient +4.2 v supply and provides 30 db of gain. the device is manufactured using an advanced ingap hbt mmic technology offering state-of-the- art reliability, temperature stability, and ruggedness. the self-contained 7 mm x 7 mm x 1.3 mm surface mount package incorporates rf matching networks optimized for output power, effciency, and linearity in a 50 system. 09/2012
2 figure 2: pinout (x-ray top view) table 1: pin description gnd rf ou t rf in gnd 1 10 2 3 4 5 6 9 8 7 v cc1 gnd gnd gnd gnd gnd 14 13 12 11 v ref v det v cc2 gnd gnd pin name description 1 v ref reference voltage 2 gnd ground 3 gnd ground 4 v cc1 supply voltage 5 rf in rf input 6 gnd ground 7 v det detector voltage 8 gnd ground 9 gnd ground 10 gnd ground 11 v cc2 supply voltage 12 rf out rf output 13 gnd ground 14 gnd ground data sheet - rev 2.1 09/2012 awb7127
3 electrical characteristics table 2: absolute minimum and maximum ratings stresses in excess of the absolute ratings may cause permanent damage. functional operation is not implied under these conditions. exposure to absolute ratings for extended periods of time may adversely affect reliability. table 3: operating ranges the device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defned in the electrical specifcations. parameter min typ max unit comments operating frequency (f) 2110 - 2170 mhz supply voltage (v cc ) +3.2 +4.2 +4.5 v reference voltage (v ref ) +2.80 0 +2.85 - +2.90 +0.5 v pa "on" pa "shut down" rf output power (p out ) - +24.5 - dbm case temperature (t c ) -40 - +85 c parameter min max unit supply voltage (v cc ) 0 +5 v reference voltage (v ref ) 0 +3.5 v rf output power (p out ) - +28 dbm esd rating human body model (1) charged device model (2) class 1c class iv - - msl rating (3) 4 - junction temperature (t j ) - +150 ?c storage temperature (t stg ) -40 +150 ?c notes: (1) jedec js-001-2010 (2) jedec jesd22-c101d (3) 260 ?c peak reflow data sheet - rev 2.1 09/2012 awb7127
4 table 4: electrical specifcations (t c = +25 c, v cc = +4.2 v, v ref = +2.85 v, 50 ? system) notes: (1) acpr and effciency measured at 2140 mhz. (2) p out = +24.5 dbm. (3) tm1 wcdma 64 dpch. parameter min typ max unit comments gain (2) 28 30 35 db acpr (1), (2), (3) @ 5 mhz @ 10 mhz - - -50 -62 -47 -56 dbc power-added effciency (1), (2), (3) 15.5 18 - % thermal resistance (r jc ) - 22 - c/w supply current (1), (2), (3) - 370 - ma total through v cc pins quiescent current (icq) - 130 140 ma reference current - 7 10 ma through v ref pin leakage current - 1.5 5 ba v cc = +5 v, v ref = 0 v harmonics 2f o 3f o , 4f o - - -52 -50 -46 -50 dbc input return loss 10 14 - db p1db - +32 - dbm cw tone spurious output level (all spurious outputs) - - -60 dbc p out < +24.5 dbm in-band load vswr < 5:1 out-of-band load vswr < 10:1 applies over all voltage and temperature operating ranges load mismatch stress with no permanent degradation or failure 8:1 - - vswr v cc = +4.2 v, p in = 0 dbm applies over full operating temperature range data sheet - rev 2.1 09/2012 awb7127
5 application information to ensure proper performance, refer to all related application notes on the anadigics web site: http://www.anadigics.com shutdown mode the power amplifer may be placed in a shutdown mode by applying logic low levels (see operating ranges table) to the v ref voltage. figure 3: application circuit schematic aw b7 12 7 1 2 3 4 5 7 6 * opti onal rf ou t rf ou t gn d rf in rf in v re f v re f c15 0 .1 f 14 13 12 11 10 8 9 gn d gn d gn d gn d gn d gn d gn d v cc2 c 7 1 000 p f 0 .1 f c9* 1 0 f c10* 1 00 f v cc2 v cc1 c 1* f v cc1 c 2* f c 3 0 .1 f c 4 1 000 p f 10 v det c 6 0 .1 f v det r2 100 k 4.7 k r1 c11 1 000 p f c 8 100 c12* 1 00 f data sheet - rev 2.1 09/2012 awb7127
6 figure 4: pcb footprint 1 2 3 data sheet - rev 2.1 09/2012 awb7127
7 package outline figure 5: m41 package outline - 14 pin 7 mm x 7 mm x 1.3 mm surface mount module figure 6: branding specifcation b7127h pin 1 identifier pa rt number date co de y y= y ear ww= wo rk w eek mark ing co de anadigics logo l ot number c ountr y co de data sheet - rev 2.1 09/2012 awb7127
8 component packaging figure 7: tape & reel packaging table 5: tape & reel dimensions pin 1 pa ckag e ty pe ta pe wi dt h po cke t pi tc h reel ca pa ci ty ma x reel di a 7 mm x 7 mm x 1. 3 mm 16 mm 12 mm 2500 13 " data sheet - rev 2.1 09/2012 awb7127
9 ordering information order number temperature range package description component packaging AWB7127HM41P8 -40 o c to +85 o c halogen free rohs-compliant 14 pin 7 mm x 7 mm x 1.3 mm surface mount module tape and reel, 2500 pieces per reel warning anadigics products are not intended for use in life support appliances, devices or systems. use of an anadigics product in any such application without written consent is prohibited. import ant notice anadigics 141 mount bethel road warren, new jersey 07059, u.s.a. tel: +1 (908) 668-5000 fax: +1 (908) 668-5132 url: http://www.anadigics.com anadigics, inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. the product specifcations contained in advanced product information sheets and preliminary data sheets are subject to change prior to a products formal introduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibilities for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. data sheet - rev 2.1 09/2012 awb7127
|
